/COM,ANSYS RELEASE 11.0SP1 UP20070830       20:21:26    04/05/2010

 *** ERROR ***                           CP =       3.094   TIME= 20:22:07
 The value of ROTZ at node 39 is 9.130283074E+82.  It is greater than    
 the current limit of 1000000.  This generally indicates rigid body      
 motion as a result of an unconstrained model.  Verify that your model   
 is properly constrained.                                                

 *** ERROR ***                           CP =       3.328   TIME= 20:22:13
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =       3.484   TIME= 20:22:20
 No results file available.                                              

 *** ERROR ***                           CP =       6.703   TIME= 20:26:23
 The value of ROTZ at node 39 is 2.282570853E+78.  It is greater than    
 the current limit of 1000000.  This generally indicates rigid body      
 motion as a result of an unconstrained model.  Verify that your model   
 is properly constrained.                                                

 *** ERROR ***                           CP =       6.797   TIME= 20:26:34
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =       6.906   TIME= 20:26:41
 No results file available.                                              

 *** ERROR ***                           CP =       7.812   TIME= 20:29:11
 The value of ROTZ at node 39 is 2.282570853E+78.  It is greater than    
 the current limit of 1000000.  This generally indicates rigid body      
 motion as a result of an unconstrained model.  Verify that your model   
 is properly constrained.                                                

 *** ERROR ***                           CP =       7.938   TIME= 20:29:23
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =       8.094   TIME= 20:29:26
 No results file available.                                              

 *** ERROR ***                           CP =       8.984   TIME= 20:29:57
 The value of ROTZ at node 25 is 5.643881888E+77.  It is greater than    
 the current limit of 1000000.  This generally indicates rigid body      
 motion as a result of an unconstrained model.  Verify that your model   
 is properly constrained.                                                

 *** ERROR ***                           CP =       9.109   TIME= 20:30:02
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =       9.266   TIME= 20:30:04
 No results file available.                                              

 *** ERROR ***                           CP =      10.094   TIME= 20:30:59
 The value of ROTZ at node 25 is 5.643881888E+77.  It is greater than    
 the current limit of 1000000.  This generally indicates rigid body      
 motion as a result of an unconstrained model.  Verify that your model   
 is properly constrained.                                                

 *** ERROR ***                           CP =      10.219   TIME= 20:31:03
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =      10.328   TIME= 20:31:05
 No results file available.                                              

 *** ERROR ***                           CP =      11.312   TIME= 20:32:48
 The value of ROTZ at node 25 is 5.643881888E+77.  It is greater than    
 the current limit of 1000000.  This generally indicates rigid body      
 motion as a result of an unconstrained model.  Verify that your model   
 is properly constrained.                                                

 *** ERROR ***                           CP =      11.484   TIME= 20:32:51
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =      11.609   TIME= 20:32:52
 No results file available.                                              

 *** ERROR ***                           CP =      12.391   TIME= 20:34:48
 The value of ROTZ at node 39 is 2.282570853E+78.  It is greater than    
 the current limit of 1000000.  This generally indicates rigid body      
 motion as a result of an unconstrained model.  Verify that your model   
 is properly constrained.                                                

 *** ERROR ***                           CP =      12.469   TIME= 20:34:51
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =      12.750   TIME= 20:37:16
 No results file available.                                              

 *** WARNING ***                         CP =      19.641   TIME= 20:44:02
 The program chosen initial timestep/load-factor is arbitrary.  It is    
 necessary for the user to supply a suitable initial                     
 timestep/load-factor through the NSUB or DELTIM command for             
 convergence and overall efficiency.                                     

 *** ERROR ***                           CP =      20.047   TIME= 20:44:05
 Excessive thickness change in Element 1.                                

 *** ERROR ***                           CP =      20.203   TIME= 20:44:10
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =      20.312   TIME= 20:44:13
 No results file available.                                              

 *** WARNING ***                         CP =      20.938   TIME= 20:44:48
 The program chosen initial timestep/load-factor is arbitrary.  It is    
 necessary for the user to supply a suitable initial                     
 timestep/load-factor through the NSUB or DELTIM command for             
 convergence and overall efficiency.                                     

 *** ERROR ***                           CP =      21.312   TIME= 20:44:50
 Excessive thickness change in Element 1.                                

 *** ERROR ***                           CP =      21.469   TIME= 20:44:55
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =      21.609   TIME= 20:44:58
 No results file available.                                              

 *** ERROR ***                           CP =      21.766   TIME= 20:45:06
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =      21.828   TIME= 20:45:08
 No results file available.                                              

 *** WARNING ***                         CP =      22.422   TIME= 20:45:49
 The program chosen initial timestep/load-factor is arbitrary.  It is    
 necessary for the user to supply a suitable initial                     
 timestep/load-factor through the NSUB or DELTIM command for             
 convergence and overall efficiency.                                     

 *** ERROR ***                           CP =      22.781   TIME= 20:45:52
 Excessive thickness change in Element 1.                                

 *** ERROR ***                           CP =      22.875   TIME= 20:45:56
 An error occurred while attempting to open the results file mp.rst.     

 *** ERROR ***                           CP =      23.000   TIME= 20:45:58
 No results file available.