/COM,ANSYS RELEASE 11.0SP1 UP20070830       10:24:40    02/21/2011

 *** ERROR ***                           CP =      13.156   TIME= 12:56:07
 Keypoint 6 is referenced by only one line.  Improperly connected line   
 set for AL command.                                                     

 *** ERROR ***                           CP =      16.969   TIME= 13:20:30
 Undefined line 10.                                                      

 *** WARNING ***                         CP =      22.453   TIME= 13:52:42
 The mesh of area 2 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      22.969   TIME= 13:52:46
 The mesh of area 3 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      24.484   TIME= 13:59:07
 The mesh of area 1 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      24.578   TIME= 13:59:07
 The mesh of area 3 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      24.625   TIME= 13:59:08
 Shape testing revealed that 2 of the 632 new or modified elements       
 violate shape warning limits.  To review test results, please see the   
 output file or issue the CHECK command.                                 

 *** WARNING ***                         CP =      25.578   TIME= 14:00:58
 The mesh of area 1 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      25.688   TIME= 14:00:58
 The mesh of area 3 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      25.703   TIME= 14:00:58
 Shape testing revealed that 2 of the 632 new or modified elements       
 violate shape warning limits.  To review test results, please see the   
 output file or issue the CHECK command.                                 

 *** WARNING ***                         CP =      27.484   TIME= 14:03:39
 The mesh of area 1 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      27.578   TIME= 14:03:39
 The mesh of area 2 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      27.719   TIME= 14:03:39
 The mesh of area 3 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      29.281   TIME= 14:04:24
 The mesh of area 1 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      29.391   TIME= 14:04:24
 The mesh of area 2 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      29.531   TIME= 14:04:24
 The mesh of area 3 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      31.219   TIME= 14:06:43
 The mesh of area 1 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      31.328   TIME= 14:06:43
 The mesh of area 2 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.   

 *** WARNING ***                         CP =      31.469   TIME= 14:06:44
 The mesh of area 3 contains PLANE182 triangles, which are much too      
 stiff in bending.  Use quadratic (6- or 8-node) elements if possible.