/COM,ANSYS RELEASE 11.0SP1 UP20070830 15:01:42 04/12/2011 *** WARNING *** CP = 1.641 TIME= 15:02:07 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 1.703 TIME= 15:02:07 Undefined parameter used for coordinate 1. A value of 0.0 will be used. *** WARNING *** CP = 1.734 TIME= 15:02:07 Undefined parameter used for coordinate 1. A value of 0.0 will be used. *** ERROR *** CP = 1.734 TIME= 15:02:07 Element type 1 is PLANE121, which cannot be used with the LMES command. The LMESH operation is aborted at line 1. *** WARNING *** CP = 2.094 TIME= 15:03:29 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 2.109 TIME= 15:03:29 Undefined parameter used for coordinate 1. A value of 0.0 will be used. *** WARNING *** CP = 2.141 TIME= 15:03:29 Undefined parameter used for coordinate 1. A value of 0.0 will be used. *** WARNING *** CP = 2.188 TIME= 15:03:29 Arc of radius 7.E-02 not recommended between keypoints 1 and 2. *** ERROR *** CP = 2.219 TIME= 15:03:30 Lines cross each other on area 1. *** WARNING *** CP = 3.078 TIME= 15:05:41 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 3.094 TIME= 15:05:41 Arc of radius 7.E-02 not recommended between keypoints 1 and 2. *** WARNING *** CP = 3.125 TIME= 15:05:41 Area 1 had difficulty tessellating. The representation of this area during plotting may not look accurate. *** WARNING *** CP = 3.156 TIME= 15:05:42 Area 1 has very sharp vertices. This area may be difficult to mesh. *** WARNING *** CP = 4.297 TIME= 15:08:13 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 4.312 TIME= 15:08:13 Arc of radius 7.E-02 not recommended between keypoints 1 and 2. *** WARNING *** CP = 4.328 TIME= 15:08:13 Area 1 had difficulty tessellating. The representation of this area during plotting may not look accurate. *** WARNING *** CP = 4.359 TIME= 15:08:13 Area 1 has very sharp vertices. This area may be difficult to mesh. *** WARNING *** CP = 5.141 TIME= 15:10:57 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 5.141 TIME= 15:10:58 Area 1 had difficulty tessellating. The representation of this area during plotting may not look accurate. *** WARNING *** CP = 5.188 TIME= 15:10:58 Area 1 has very sharp vertices. This area may be difficult to mesh. *** WARNING *** CP = 5.750 TIME= 15:12:32 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 5.766 TIME= 15:12:33 Area 1 had difficulty tessellating. The representation of this area during plotting may not look accurate. *** WARNING *** CP = 5.797 TIME= 15:12:33 Area 1 has very sharp vertices. This area may be difficult to mesh. *** WARNING *** CP = 6.172 TIME= 15:13:48 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 6.484 TIME= 15:14:35 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** ERROR *** CP = 6.500 TIME= 15:14:36 Undefined line 5. *** WARNING *** CP = 6.891 TIME= 15:16:14 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 7.391 TIME= 15:24:12 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 7.875 TIME= 15:28:10 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 8.219 TIME= 15:28:53 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 8.453 TIME= 15:32:14 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 8.703 TIME= 15:32:23 There are no selected areas in the set named on the AMES command. *** WARNING *** CP = 10.688 TIME= 15:34:05 Initial attempt to mesh area 10 was unsuccessful. Automatically attempting to correct and remesh. (4). *** WARNING *** CP = 16.406 TIME= 15:34:11 Shape testing revealed that 1 of the 2604 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 18.359 TIME= 15:38:07 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** ERROR *** CP = 18.406 TIME= 15:38:07 Undefined area 1. *** WARNING *** CP = 19.047 TIME= 15:40:24 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 19.766 TIME= 15:42:12 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 21.047 TIME= 15:44:42 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 21.500 TIME= 15:45:28 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 22.266 TIME= 15:48:27 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 22.875 TIME= 15:49:18 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 22.938 TIME= 15:49:18 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 24.703 TIME= 16:46:38 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 24.766 TIME= 16:46:38 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 24.891 TIME= 16:46:38 No DOF labels specified on the DL command. *** WARNING *** CP = 25.453 TIME= 16:48:14 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 25.500 TIME= 16:48:14 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 25.594 TIME= 16:48:14 Area 3 does not contain line 10. *** WARNING *** CP = 26.422 TIME= 16:49:28 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 26.484 TIME= 16:49:28 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 26.594 TIME= 16:49:29 For item= LINE the component ( 11 ) is invalid. The LSEL command is ignored. *** WARNING *** CP = 27.266 TIME= 16:51:52 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 27.297 TIME= 16:51:53 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 29.234 TIME= 16:51:55 Shape testing revealed that 3 of the 697 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 29.828 TIME= 16:54:30 An attempt was made to define KEYOPT values for an undefined element type 3. The KEYOPT command is ignored. *** WARNING *** CP = 29.906 TIME= 16:54:31 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 32.406 TIME= 16:55:28 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 32.406 TIME= 16:55:28 Line 9 has no nodes associated with it. Constraint not transferred. *** ERROR *** CP = 32.438 TIME= 16:55:28 Element 1 requires material properties and references material number 1 for which no properties are defined. Checking terminates. *** ERROR *** CP = 32.531 TIME= 16:55:37 The step data was checked and there were errors found. Please check output or errors file ( N:\FE\fc_2d.err ) for messages. *** WARNING *** CP = 33.062 TIME= 17:00:09 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 34.938 TIME= 17:00:11 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 34.938 TIME= 17:00:11 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 37.438 TIME= 17:04:47 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 39.281 TIME= 17:04:49 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 39.281 TIME= 17:04:49 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 42.984 TIME= 17:09:18 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 44.797 TIME= 17:09:20 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 44.797 TIME= 17:09:20 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 47.031 TIME= 17:10:57 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 48.922 TIME= 17:10:59 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 48.922 TIME= 17:10:59 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 58.500 TIME= 15:45:59 Unknown parameter name= DVDY. A value of 7.888609052E-31 will be used. *** WARNING *** CP = 58.516 TIME= 15:45:59 Unknown parameter name= DVDY. A value of 7.888609052E-31 will be used. *** WARNING *** CP = 58.578 TIME= 15:45:59 Error on AGEN command. Itimes must be greater than 1 for generation to take place. Command ignored. *** WARNING *** CP = 59.422 TIME= 15:49:35 Unknown parameter name= DVDY. A value of 7.888609052E-31 will be used. *** WARNING *** CP = 59.438 TIME= 15:49:35 Unknown parameter name= DVDY. A value of 7.888609052E-31 will be used. *** WARNING *** CP = 59.953 TIME= 15:50:12 Unknown parameter name= DVDY. A value of 7.888609052E-31 will be used. *** WARNING *** CP = 59.984 TIME= 15:50:12 Unknown parameter name= DVDY. A value of 7.888609052E-31 will be used. *** WARNING *** CP = 61.578 TIME= 15:58:41 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 69.672 TIME= 15:58:49 Area 2 does not contain line 10. *** WARNING *** CP = 71.469 TIME= 16:07:15 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 72.844 TIME= 16:11:05 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 73.641 TIME= 16:14:49 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 74.375 TIME= 16:15:55 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 75.000 TIME= 16:16:48 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 80.750 TIME= 16:16:53 Shape testing revealed that 1 of the 4976 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** ERROR *** CP = 80.797 TIME= 16:16:54 Area 2 does not contain line 10. *** WARNING *** CP = 83.094 TIME= 16:24:11 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 88.797 TIME= 16:24:17 Shape testing revealed that 1 of the 4976 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 90.656 TIME= 16:30:06 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 93.719 TIME= 16:30:09 Shape testing revealed that 1 of the 1353 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 94.734 TIME= 16:35:10 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 97.750 TIME= 16:35:13 Shape testing revealed that 1 of the 1353 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 99.938 TIME= 16:43:54 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 102.984 TIME= 16:43:57 Shape testing revealed that 1 of the 1353 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 104.156 TIME= 16:48:05 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 107.250 TIME= 16:48:08 Shape testing revealed that 1 of the 1353 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 107.312 TIME= 16:48:08 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 107.312 TIME= 16:48:08 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 107.328 TIME= 16:48:08 Previous testing revealed that 1 of the 1353 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 108.797 TIME= 16:50:33 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 111.859 TIME= 16:50:36 Shape testing revealed that 1 of the 1353 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 111.938 TIME= 16:50:36 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 111.938 TIME= 16:50:36 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 111.953 TIME= 16:50:36 Previous testing revealed that 1 of the 1353 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 113.125 TIME= 16:53:28 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 116.219 TIME= 16:53:31 Shape testing revealed that 1 of the 1353 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** ERROR *** CP = 116.281 TIME= 16:53:31 Area 2 does not contain line 4. *** WARNING *** CP = 116.750 TIME= 16:54:04 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 119.781 TIME= 16:54:07 Shape testing revealed that 1 of the 1353 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 119.844 TIME= 16:54:08 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 119.844 TIME= 16:54:08 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 119.859 TIME= 16:54:08 Previous testing revealed that 1 of the 1353 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 123.062 TIME= 17:15:02 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 145.797 TIME= 17:15:25 Shape testing revealed that 6 of the 4255 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 145.875 TIME= 17:15:25 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 145.875 TIME= 17:15:25 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 145.922 TIME= 17:15:25 Previous testing revealed that 6 of the 4255 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 148.812 TIME= 17:18:38 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 350.359 TIME= 17:22:01 Shape testing revealed that 15 of the 54107 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 350.469 TIME= 17:22:01 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 350.469 TIME= 17:22:01 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 350.859 TIME= 17:22:02 Previous testing revealed that 15 of the 54107 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. /COM,ANSYS RELEASE 11.0SP1 UP20070830 17:43:08 04/13/2011 *** WARNING *** CP = 1.703 TIME= 17:44:17 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 177.953 TIME= 17:47:14 Shape testing revealed that 15 of the 54107 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 178.016 TIME= 17:47:14 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 178.016 TIME= 17:47:14 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 178.406 TIME= 17:47:14 Previous testing revealed that 15 of the 54107 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 206.266 TIME= 18:19:24 DOF constraint VOLT from line 2 (1st value = 1) is overwriting a D on node 2 (1st value = 7.888609052E-31) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 206.266 TIME= 18:19:24 DOF constraint VOLT from line 3 (1st value = 7.888609052E-31) is overwriting a D on node 202 (1st value = 1) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 207.438 TIME= 18:21:22 DOF constraint VOLT from line 2 (1st value = 1) is overwriting a D on node 2 (1st value = 7.888609052E-31) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 207.438 TIME= 18:21:22 DOF constraint VOLT from line 3 (1st value = 7.888609052E-31) is overwriting a D on node 182 (1st value = 1) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 210.562 TIME= 19:29:06 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 211.047 TIME= 19:30:09 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 211.938 TIME= 19:32:20 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 212.469 TIME= 19:34:20 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 415.344 TIME= 19:37:44 Shape testing revealed that 15 of the 54960 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 415.391 TIME= 19:37:44 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 415.391 TIME= 19:37:44 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 415.672 TIME= 19:37:45 Previous testing revealed that 15 of the 54960 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 444.547 TIME= 19:59:34 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 444.609 TIME= 19:59:34 Topological degeneracy detected for ASBA command. Try modifying geometry slightly or loosening the tolerance (BTOL command). If BTOL is relaxed, be sure to change the tolerance back to the default after operation. *** WARNING *** CP = 445.062 TIME= 20:00:35 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 445.516 TIME= 20:01:56 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 446.078 TIME= 20:04:12 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 446.625 TIME= 20:05:12 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 447.656 TIME= 20:06:11 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 448.172 TIME= 20:06:32 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 448.719 TIME= 20:07:38 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 678.203 TIME= 20:11:29 Shape testing revealed that 21 of the 57356 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 678.281 TIME= 20:11:29 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 678.281 TIME= 20:11:29 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 678.672 TIME= 20:11:29 Previous testing revealed that 21 of the 57356 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 700.688 TIME= 20:19:39 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 700.828 TIME= 20:19:39 Topological degeneracy detected for ASBA command. Try modifying geometry slightly or loosening the tolerance (BTOL command). If BTOL is relaxed, be sure to change the tolerance back to the default after operation. *** WARNING *** CP = 701.391 TIME= 20:20:30 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 702.453 TIME= 20:21:30 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 703.109 TIME= 20:22:09 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 703.703 TIME= 20:22:46 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1181.609 TIME= 20:30:46 Shape testing revealed that 11 of the 55926 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1181.688 TIME= 20:30:46 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1181.688 TIME= 20:30:46 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1182.078 TIME= 20:30:46 Previous testing revealed that 11 of the 55926 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1202.781 TIME= 20:38:02 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1203.422 TIME= 20:38:38 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1204.047 TIME= 20:39:04 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1422.516 TIME= 20:42:44 Shape testing revealed that 10 of the 57712 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1422.625 TIME= 20:42:44 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1422.625 TIME= 20:42:44 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1423.047 TIME= 20:42:44 Previous testing revealed that 10 of the 57712 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1449.500 TIME= 20:52:25 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 1453.188 TIME= 20:52:29 Area 1000 does not contain line 10. *** WARNING *** CP = 1453.766 TIME= 20:53:24 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1455.922 TIME= 20:54:21 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 1459.594 TIME= 20:54:24 Area 1000 does not contain line 10. *** WARNING *** CP = 1460.500 TIME= 20:56:47 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 1460.641 TIME= 20:56:47 Topological degeneracy detected for ASBA command. Try modifying geometry slightly or loosening the tolerance (BTOL command). If BTOL is relaxed, be sure to change the tolerance back to the default after operation. *** WARNING *** CP = 1461.344 TIME= 20:57:34 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. /COM,ANSYS RELEASE 11.0SP1 UP20070830 21:20:42 04/13/2011 /COM,ANSYS RELEASE 11.0SP1 UP20070830 18:05:35 04/14/2011 *** WARNING *** CP = 1.781 TIME= 18:06:48 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 2.391 TIME= 18:07:23 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 2.938 TIME= 18:07:42 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 3.453 TIME= 18:25:18 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 203.703 TIME= 18:28:40 Shape testing revealed that 13 of the 54088 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 203.734 TIME= 18:28:40 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 203.734 TIME= 18:28:40 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 204.000 TIME= 18:28:41 Previous testing revealed that 13 of the 54088 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. /COM,ANSYS RELEASE 11.0SP1 UP20070830 16:58:50 04/18/2011 *** WARNING *** CP = 1.609 TIME= 16:59:26 File fc_2d-cyl.txt does not exist. The /INPUT command is ignored. *** WARNING *** CP = 1.766 TIME= 16:59:40 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 187.406 TIME= 17:02:49 Shape testing revealed that 13 of the 54088 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 187.469 TIME= 17:02:49 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 187.469 TIME= 17:02:49 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 187.828 TIME= 17:02:50 Previous testing revealed that 13 of the 54088 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** ERROR *** CP = 209.828 TIME= 17:34:11 Keypoint 12 belongs to line 12 and cannot be moved. *** ERROR *** CP = 211.594 TIME= 17:40:17 Keypoint 102 not defined. *** ERROR *** CP = 213.000 TIME= 17:49:44 Coincident point locations for keypoints 103 and 104. *** WARNING *** CP = 218.266 TIME= 18:21:19 Unknown parameter name= NOTGRADERS. A value of 7.888609052E-31 will be used. *** ERROR *** CP = 218.297 TIME= 18:21:19 No dimensions set for parameter= COMNUMBEROFCATHODEDIVISIONS. *** ERROR *** CP = 218.422 TIME= 18:21:25 The above error occurred processing field= 3/COMNUMBEROFCATHODEDIVISIONS(NOTGRADERS) Line= *SET,nc,(3 /com number of cathode divisions (not graders)). *** ERROR *** CP = 218.719 TIME= 18:21:53 Undefined line 100. *** ERROR *** CP = 219.609 TIME= 18:24:24 Undefined line 100. *** WARNING *** CP = 220.734 TIME= 18:28:38 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 406.141 TIME= 18:31:45 Shape testing revealed that 13 of the 61443 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** ERROR *** CP = 406.234 TIME= 18:31:45 *DO loop index same as outer index I. *** WARNING *** CP = 406.781 TIME= 18:39:06 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 578.297 TIME= 18:41:59 Shape testing revealed that 8 of the 51616 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 578.391 TIME= 18:41:59 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 578.391 TIME= 18:41:59 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 578.656 TIME= 18:41:59 Previous testing revealed that 8 of the 51616 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 611.484 TIME= 12:27:25 No *DO trips needed, enter *ENDDO . *** WARNING *** CP = 611.500 TIME= 12:27:25 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 643.156 TIME= 12:27:57 Meshing of area 1000 aborted by user (Logfile for this session requires correction). *** WARNING *** CP = 643.766 TIME= 12:29:01 The requested EPLOT command cannot be executed. Either elements do not exist or the selected elements are not supported by PowerGraphics. To correct this situation, try selecting different elements,etc, or turning off PowerGraphics. *** WARNING *** CP = 644.438 TIME= 14:55:19 No *DO trips needed, enter *ENDDO . *** WARNING *** CP = 645.297 TIME= 15:01:16 No *DO trips needed, enter *ENDDO . *** WARNING *** CP = 645.328 TIME= 15:01:16 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 664.141 TIME= 15:01:35 Meshing of area 1000 aborted by user (Logfile for this session requires correction). *** WARNING *** CP = 665.156 TIME= 15:06:53 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 665.656 TIME= 15:07:30 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 991.062 TIME= 15:13:10 Shape testing revealed that 6 of the 47640 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 1 not transferred to nodes. *** WARNING *** CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 2 not transferred to nodes. *** WARNING *** CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 3 not transferred to nodes. *** WARNING *** CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 6 not transferred to nodes. *** WARNING *** CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 7 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 8 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 9 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 11 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 12 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 13 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 14 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 15 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 16 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 17 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 18 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 19 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 20 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 21 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 22 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 23 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 24 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 25 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 26 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 27 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 28 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 29 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 30 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.312 TIME= 15:17:14 Constraint on undefined or unselected line 31 not transferred to nodes. *** WARNING *** SUPPRESSED MESSAGE CP = 991.328 TIME= 15:17:14 Symmetry or anti-symmetry conditions on unselected line 4 are not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 991.328 TIME= 15:17:14 Symmetry or anti-symmetry conditions on unselected line 10 are not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 991.531 TIME= 15:17:15 Previous testing revealed that 6 of the 47640 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1011.125 TIME= 15:25:57 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1060.734 TIME= 15:26:47 Meshing of area 1000 aborted by user (Logfile for this session requires correction). *** WARNING *** CP = 1061.672 TIME= 15:28:57 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1228.328 TIME= 15:32:39 Line 6 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1228.328 TIME= 15:32:39 Line 7 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1228.328 TIME= 15:32:39 Line 9 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1228.328 TIME= 15:32:39 DOF constraint VOLT from line 12 (1st value = 91000) is overwriting a D on node 462 (1st value = 0) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 1228.328 TIME= 15:32:39 DOF constraint VOLT from line 13 (1st value = 91000) is overwriting a D on node 402 (1st value = 0) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.328 TIME= 15:32:39 DOF constraint VOLT from line 13 (1st value = 91000) is overwriting a D on node 322 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 16 (1st value = 92000) is overwriting a D on node 650 (1st value = 91000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 17 (1st value = 92000) is overwriting a D on node 770 (1st value = 91000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 20 (1st value = 93000) is overwriting a D on node 1026 (1st value = 92000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 21 (1st value = 93000) is overwriting a D on node 1146 (1st value = 92000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 24 (1st value = 94000) is overwriting a D on node 1402 (1st value = 93000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 25 (1st value = 94000) is overwriting a D on node 1522 (1st value = 93000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 28 (1st value = 95000) is overwriting a D on node 1778 (1st value = 94000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1228.344 TIME= 15:32:39 DOF constraint VOLT from line 29 (1st value = 95000) is overwriting a D on node 1898 (1st value = 94000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 1259.406 TIME= 15:45:36 /CLE is not a recognized SOLUTION command, abbreviation, or macro. This command will be ignored. *** ERROR *** CP = 1260.000 TIME= 15:45:42 Keypoint 1 is associated with node 1 and cannot be changed. *** WARNING *** CP = 1260.531 TIME= 15:45:56 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1262.141 TIME= 15:50:33 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1262.891 TIME= 15:51:21 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1429.750 TIME= 15:54:09 DOF constraint VOLT from line 11 (1st value = 90000) is overwriting a D on node 242 (1st value = 0) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 1449.344 TIME= 15:56:45 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1450.531 TIME= 16:00:50 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1638.328 TIME= 16:11:50 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1785.562 TIME= 16:14:18 Shape testing revealed that 2 of the 52445 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1785.906 TIME= 16:14:19 Previous testing revealed that 2 of the 52445 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1813.891 TIME= 16:53:30 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1951.578 TIME= 16:55:49 Shape testing revealed that 2 of the 52130 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1951.969 TIME= 16:55:49 Previous testing revealed that 2 of the 52130 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1972.219 TIME= 17:18:54 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1972.828 TIME= 17:20:41 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1973.516 TIME= 17:22:37 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1974.062 TIME= 17:23:36 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1974.812 TIME= 17:24:46 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 2132.031 TIME= 17:27:24 Shape testing revealed that 4 of the 55086 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 2132.391 TIME= 17:27:25 Previous testing revealed that 4 of the 55086 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 2152.984 TIME= 17:31:38 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 2351.781 TIME= 17:34:58 Shape testing revealed that 3 of the 54047 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 2352.109 TIME= 17:34:58 Previous testing revealed that 3 of the 54047 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 2371.828 TIME= 17:37:46 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 2571.125 TIME= 17:41:08 Shape testing revealed that 3 of the 54047 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 2571.469 TIME= 17:41:08 Previous testing revealed that 3 of the 54047 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** FATAL *** CP = 2594.938 TIME= 17:57:42 The low level memory manager failed to return a valid memory handle for a free operation. Pointer value: 317257024. It is likely that the code is calling for a free with a pointer that was not allocated via the memory manager. ************************************************************************ The above error is non-recoverable by ANSYS ANSYS run terminated by the indicated error Current data base saved if possible. ************************************************************************ /COM,ANSYS RELEASE 11.0SP1 UP20070830 14:46:25 04/26/2011 *** ERROR *** CP = 1.656 TIME= 14:47:00 Undefined line 6. *** ERROR *** CP = 2.125 TIME= 14:49:39 Arc of radius 1.E-03 not possible between keypoints 11 and 13. *** ERROR *** CP = 3.031 TIME= 14:52:28 Arc of radius 1.E-03 not possible between keypoints 11 and 13. *** ERROR *** CP = 3.906 TIME= 14:54:47 Arc of radius 1.E-03 not possible between keypoints 11 and 13. *** WARNING *** CP = 5.156 TIME= 15:04:35 /CLE is not a recognized PREP7 command, abbreviation, or macro. This command will be ignored. *** ERROR *** CP = 7.219 TIME= 15:08:36 Keypoint 10 is referenced by only one line. Improperly connected line set for AL command. *** ERROR *** CP = 7.875 TIME= 15:09:44 Keypoint 10 is referenced by only one line. Improperly connected line set for AL command. *** WARNING *** CP = 12.375 TIME= 15:30:10 Undefined line 0. *** WARNING *** CP = 12.406 TIME= 15:30:10 LL is not a recognized PREP7 command, abbreviation, or macro. This command will be ignored. *** WARNING *** CP = 16.328 TIME= 15:40:53 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. /COM,ANSYS RELEASE 11.0SP1 UP20070830 13:25:07 04/27/2011 *** WARNING *** CP = 1.922 TIME= 13:28:05 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 2.688 TIME= 13:37:22 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 3.547 TIME= 13:40:47 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 4.484 TIME= 13:44:04 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** ERROR *** CP = 4.609 TIME= 13:44:04 Area 1000 does not contain line 12. *** WARNING *** CP = 5.109 TIME= 13:44:54 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 6.109 TIME= 13:47:23 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 7.031 TIME= 13:48:39 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 278.625 TIME= 13:53:13 Meshing of area 1000 aborted by user (Logfile for this session requires correction). *** WARNING *** CP = 278.703 TIME= 13:53:13 Line 1 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 278.703 TIME= 13:53:13 Line 2 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 278.703 TIME= 13:53:13 Line 3 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 278.703 TIME= 13:53:13 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 278.703 TIME= 13:53:13 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 12 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 13 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 14 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 15 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 20 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 21 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 22 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 23 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 24 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 25 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 26 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 27 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 28 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 29 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 30 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 31 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 32 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 33 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 101 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 102 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 103 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 104 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 105 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 106 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 107 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 108 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 301 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 302 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 303 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Line 304 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Symmetry or anti-symmetry conditions on unmeshed line 4 are not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 Symmetry or anti-symmetry conditions on unmeshed line 12 are not transferred. *** ERROR *** SUPPRESSED MESSAGE CP = 278.703 TIME= 13:53:13 There are no nodes defined. *** WARNING *** CP = 279.094 TIME= 13:53:33 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 328.406 TIME= 13:54:22 Meshing of area 1000 aborted by user (Logfile for this session requires correction). *** WARNING *** CP = 328.438 TIME= 13:54:22 Line 1 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 328.438 TIME= 13:54:22 Line 2 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 328.438 TIME= 13:54:22 Line 3 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 328.438 TIME= 13:54:22 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 328.438 TIME= 13:54:22 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 12 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 13 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 14 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 15 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 16 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 17 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 18 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 19 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 20 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 21 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 22 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 23 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 24 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 25 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 26 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 27 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 28 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 29 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 30 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 31 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 32 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 33 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 101 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 102 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 103 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 104 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 105 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 106 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 107 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 108 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 301 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 302 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 303 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Line 304 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Symmetry or anti-symmetry conditions on unmeshed line 4 are not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 Symmetry or anti-symmetry conditions on unmeshed line 10 are not transferred. *** ERROR *** SUPPRESSED MESSAGE CP = 328.438 TIME= 13:54:22 There are no nodes defined. *** WARNING *** CP = 328.828 TIME= 13:55:00 The requested EPLOT command cannot be executed. Either elements do not exist or the selected elements are not supported by PowerGraphics. To correct this situation, try selecting different elements,etc, or turning off PowerGraphics. *** WARNING *** CP = 329.266 TIME= 13:55:52 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 343.078 TIME= 13:56:06 Meshing of area 1000 aborted by user (Logfile for this session requires correction). *** WARNING *** CP = 343.125 TIME= 13:56:06 Line 1 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 343.125 TIME= 13:56:06 Line 2 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 343.125 TIME= 13:56:06 Line 3 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 343.125 TIME= 13:56:06 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 343.125 TIME= 13:56:06 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 12 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 13 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 14 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 15 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 20 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 21 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 22 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 23 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 24 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 25 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 26 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 27 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 28 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 29 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 30 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 31 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 32 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 33 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 101 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 102 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 103 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 104 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 105 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 106 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 107 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 108 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 301 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 302 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 303 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Line 304 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Symmetry or anti-symmetry conditions on unmeshed line 4 are not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 Symmetry or anti-symmetry conditions on unmeshed line 12 are not transferred. *** ERROR *** SUPPRESSED MESSAGE CP = 343.125 TIME= 13:56:06 There are no nodes defined. *** WARNING *** CP = 343.656 TIME= 13:56:41 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 441.078 TIME= 13:58:19 Shape testing revealed that 4 of the 61394 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 441.141 TIME= 13:58:19 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 441.141 TIME= 13:58:19 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 441.156 TIME= 13:58:19 DOF constraint VOLT from line 12 (1st value = 90000) is overwriting a D on node 1 (1st value = 0) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 441.156 TIME= 13:58:19 DOF constraint VOLT from line 14 (1st value = 91000) is overwriting a D on node 1432 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 441.156 TIME= 13:58:19 DOF constraint VOLT from line 15 (1st value = 91000) is overwriting a D on node 322 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 441.156 TIME= 13:58:19 DOF constraint VOLT from line 22 (1st value = 93000) is overwriting a D on node 4158 (1st value = 92000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 441.156 TIME= 13:58:19 DOF constraint VOLT from line 25 (1st value = 93000) is overwriting a D on node 4190 (1st value = 92000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 441.156 TIME= 13:58:19 DOF constraint VOLT from line 30 (1st value = 95000) is overwriting a D on node 4234 (1st value = 94000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 441.156 TIME= 13:58:19 DOF constraint VOLT from line 31 (1st value = 95000) is overwriting a D on node 4278 (1st value = 94000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 441.422 TIME= 13:58:19 Previous testing revealed that 4 of the 61394 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 469.328 TIME= 14:05:37 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 472.984 TIME= 14:05:41 Meshing of area 1000 aborted by user (Logfile for this session requires correction). *** WARNING *** CP = 473.000 TIME= 14:05:41 Line 1 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 473.000 TIME= 14:05:41 Line 2 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 473.000 TIME= 14:05:41 Line 3 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 473.000 TIME= 14:05:41 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 473.000 TIME= 14:05:41 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 12 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 13 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 14 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 15 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 20 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 21 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 22 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 23 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 24 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 25 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 26 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 27 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 28 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 29 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 30 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 31 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 32 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 33 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 101 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 102 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 103 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 104 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 105 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 106 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 107 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 108 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 301 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 302 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 303 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Line 304 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Symmetry or anti-symmetry conditions on unmeshed line 4 are not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 Symmetry or anti-symmetry conditions on unmeshed line 12 are not transferred. *** ERROR *** SUPPRESSED MESSAGE CP = 473.000 TIME= 14:05:41 There are no nodes defined. *** WARNING *** CP = 473.625 TIME= 14:06:41 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 932.969 TIME= 14:14:35 Shape testing revealed that 2 of the 219086 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 933.047 TIME= 14:14:35 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 933.047 TIME= 14:14:35 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 933.047 TIME= 14:14:35 DOF constraint VOLT from line 12 (1st value = 90000) is overwriting a D on node 1 (1st value = 0) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 933.062 TIME= 14:14:35 DOF constraint VOLT from line 14 (1st value = 91000) is overwriting a D on node 2518 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 933.062 TIME= 14:14:35 DOF constraint VOLT from line 15 (1st value = 91000) is overwriting a D on node 322 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 933.062 TIME= 14:14:35 DOF constraint VOLT from line 22 (1st value = 93000) is overwriting a D on node 7454 (1st value = 92000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 933.062 TIME= 14:14:36 DOF constraint VOLT from line 25 (1st value = 93000) is overwriting a D on node 7486 (1st value = 92000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 933.062 TIME= 14:14:36 DOF constraint VOLT from line 30 (1st value = 95000) is overwriting a D on node 7530 (1st value = 94000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 933.062 TIME= 14:14:36 DOF constraint VOLT from line 31 (1st value = 95000) is overwriting a D on node 7574 (1st value = 94000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 935.109 TIME= 14:14:51 Previous testing revealed that 2 of the 219086 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1054.219 TIME= 14:40:47 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1062.375 TIME= 14:40:55 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1062.375 TIME= 14:40:55 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1062.375 TIME= 14:40:55 DOF constraint VOLT from line 12 (1st value = 90000) is overwriting a D on node 1 (1st value = 0) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 1062.375 TIME= 14:40:55 DOF constraint VOLT from line 14 (1st value = 91000) is overwriting a D on node 428 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 1062.375 TIME= 14:40:55 DOF constraint VOLT from line 15 (1st value = 91000) is overwriting a D on node 322 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1062.391 TIME= 14:40:55 Line 301 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 1062.391 TIME= 14:40:55 Line 302 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 1062.391 TIME= 14:40:55 Line 303 has no nodes associated with it. Constraint not transferred. *** WARNING *** SUPPRESSED MESSAGE CP = 1062.391 TIME= 14:40:55 Line 304 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1064.844 TIME= 14:42:13 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1070.828 TIME= 14:42:20 Shape testing revealed that 10 of the 3729 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1070.891 TIME= 14:42:20 Line 8 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1070.891 TIME= 14:42:20 Line 11 has no nodes associated with it. Constraint not transferred. *** WARNING *** CP = 1070.891 TIME= 14:42:20 DOF constraint VOLT from line 12 (1st value = 90000) is overwriting a D on node 1 (1st value = 0) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 1070.891 TIME= 14:42:20 DOF constraint VOLT from line 14 (1st value = 91000) is overwriting a D on node 428 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** CP = 1070.891 TIME= 14:42:20 DOF constraint VOLT from line 15 (1st value = 91000) is overwriting a D on node 322 (1st value = 90000) that was previously transferred from another DA, DL, or set of DK's. *** WARNING *** SUPPRESSED MESSAGE CP = 1070.922 TIME= 14:42:20 Previous testing revealed that 10 of the 3729 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1074.688 TIME= 14:51:08 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1080.672 TIME= 14:51:14 Shape testing revealed that 10 of the 3729 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1080.750 TIME= 14:51:14 Previous testing revealed that 10 of the 3729 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1083.297 TIME= 14:57:50 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1089.281 TIME= 14:57:56 Shape testing revealed that 10 of the 3729 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1089.359 TIME= 14:57:56 Previous testing revealed that 10 of the 3729 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1093.828 TIME= 15:06:32 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1106.719 TIME= 15:06:45 Shape testing revealed that 4 of the 5621 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1106.812 TIME= 15:06:45 Previous testing revealed that 4 of the 5621 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1110.344 TIME= 15:22:55 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1125.906 TIME= 15:23:10 Shape testing revealed that 5 of the 5685 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1126.031 TIME= 15:23:11 Previous testing revealed that 5 of the 5685 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1130.078 TIME= 15:34:48 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1143.766 TIME= 15:35:02 Shape testing revealed that 5 of the 5764 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1143.875 TIME= 15:35:02 Previous testing revealed that 5 of the 5764 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1147.156 TIME= 15:37:00 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1180.766 TIME= 15:37:34 Shape testing revealed that 6 of the 5652 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1180.859 TIME= 15:37:34 Previous testing revealed that 6 of the 5652 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1184.359 TIME= 15:49:56 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1210.656 TIME= 15:50:23 Shape testing revealed that 7 of the 5425 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1210.766 TIME= 15:50:23 Previous testing revealed that 7 of the 5425 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** ERROR *** CP = 1215.031 TIME= 16:07:36 Keypoint 107 belongs to line 102 and cannot be moved. *** WARNING *** CP = 1215.750 TIME= 16:09:28 Unknown parameter name= RW_WA. A value of 7.888609052E-31 will be used. *** ERROR *** CP = 1215.766 TIME= 16:09:28 Keypoint 107 belongs to line 102 and cannot be moved. *** ERROR *** CP = 1216.375 TIME= 16:10:29 Keypoint 107 belongs to line 102 and cannot be moved. *** ERROR *** CP = 1217.547 TIME= 16:15:05 Keypoint 107 belongs to line 102 and cannot be moved. *** WARNING *** CP = 1220.422 TIME= 16:26:36 Undefined line 114. *** WARNING *** CP = 1220.438 TIME= 16:26:36 Undefined line 115. *** WARNING *** CP = 1220.469 TIME= 16:26:36 Undefined line 117. *** WARNING *** CP = 1220.484 TIME= 16:26:36 Undefined line 118. *** ERROR *** CP = 1222.547 TIME= 16:31:38 Keypoint 101 is referenced by only one line. Improperly connected line set for AL command. *** ERROR *** CP = 1223.000 TIME= 16:32:55 Keypoint 101 is referenced by only one line. Improperly connected line set for AL command. *** ERROR *** CP = 1223.953 TIME= 16:36:01 Keypoint 101 is referenced by only one line. Improperly connected line set for AL command. *** ERROR *** CP = 1224.641 TIME= 16:39:09 Keypoint 101 not defined. *** ERROR *** CP = 1225.531 TIME= 17:06:48 Keypoint 106 not defined. *** WARNING *** CP = 1229.906 TIME= 17:19:12 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1244.547 TIME= 17:19:27 Shape testing revealed that 2 of the 5473 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1244.641 TIME= 17:19:27 Previous testing revealed that 2 of the 5473 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1247.953 TIME= 17:21:32 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1262.594 TIME= 17:21:46 Shape testing revealed that 2 of the 5473 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1262.703 TIME= 17:21:47 Previous testing revealed that 2 of the 5473 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1266.188 TIME= 17:25:13 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1279.984 TIME= 17:25:27 Shape testing revealed that 10 of the 4853 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1280.078 TIME= 17:25:27 Previous testing revealed that 10 of the 4853 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1282.703 TIME= 17:26:27 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1300.469 TIME= 17:26:45 Shape testing revealed that 2 of the 5244 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1300.531 TIME= 17:26:45 Previous testing revealed that 2 of the 5244 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1306.531 TIME= 17:37:58 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1324.703 TIME= 17:38:16 Shape testing revealed that 2 of the 7437 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1324.828 TIME= 17:38:16 Previous testing revealed that 2 of the 7437 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1328.688 TIME= 17:41:19 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1347.453 TIME= 17:41:37 User abort requested while storing nodes and elements. Aborting process would corrupt database. Process will continue. *** WARNING *** CP = 1347.766 TIME= 17:41:38 Shape testing revealed that 5 of the 7697 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1347.844 TIME= 17:41:38 Previous testing revealed that 5 of the 7697 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1352.188 TIME= 17:43:57 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1372.094 TIME= 17:44:17 Shape testing revealed that 3 of the 7824 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1372.234 TIME= 17:44:17 Previous testing revealed that 3 of the 7824 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1377.438 TIME= 18:01:35 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1405.547 TIME= 18:02:04 Shape testing revealed that 4 of the 7575 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1405.625 TIME= 18:02:04 Previous testing revealed that 4 of the 7575 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1410.000 TIME= 18:09:08 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1423.438 TIME= 18:09:22 Shape testing revealed that 6 of the 7468 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1423.562 TIME= 18:09:22 Previous testing revealed that 6 of the 7468 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1430.156 TIME= 18:19:13 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1439.891 TIME= 18:19:23 Shape testing revealed that 4 of the 4169 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1439.969 TIME= 18:19:23 Previous testing revealed that 4 of the 4169 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1450.031 TIME= 18:38:31 Some of the requested areas to be operated on were also included in the selected set to be subtracted. These areas have been removed from the area to be subtracted list. *** WARNING *** CP = 1463.828 TIME= 18:38:45 Shape testing revealed that 6 of the 7468 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1463.938 TIME= 18:38:45 Previous testing revealed that 6 of the 7468 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command.