/COM,ANSYS RELEASE 12.1 UP20091102 17:52:42 09/24/2012 /COM,ANSYS RELEASE 12.1 UP20091102 10:46:38 09/25/2012 *** WARNING *** CP = 3.011 TIME= 11:18:34 The requested EPLOT command cannot be executed. Either elements do not exist or the selected elements are not supported by PowerGraphics. To correct this situation, try selecting different elements,etc, or turning off PowerGraphics. *** WARNING *** CP = 5.725 TIME= 11:32:27 Undefined parameter used for coordinate 2. A value of 0.0 will be used. *** WARNING *** CP = 5.756 TIME= 11:32:27 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 5.834 TIME= 11:32:27 Output entity is identical to the first input entity for VSBV command. No new entities created. *** WARNING *** CP = 6.380 TIME= 11:34:25 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 15.631 TIME= 11:49:02 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 16.349 TIME= 11:49:39 The requested EPLOT command cannot be executed. Either elements do not exist or the selected elements are not supported by PowerGraphics. To correct this situation, try selecting different elements,etc, or turning off PowerGraphics. *** WARNING *** CP = 16.879 TIME= 11:50:22 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** ERROR *** CP = 17.176 TIME= 11:50:22 There are no selected volumes in the set named on the VMESH command. *** WARNING *** CP = 21.091 TIME= 11:52:08 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 24.976 TIME= 11:54:26 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 28.969 TIME= 11:55:09 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 45.537 TIME= 11:55:37 Element is too small. Change system of units or element size. *** WARNING *** CP = 50.872 TIME= 11:56:18 Some interpolation points do not lie on the selected elements. The PDEF operation produced no results for these points. *** WARNING *** CP = 53.103 TIME= 12:04:28 The LOG file will not reproduce the ANSYS session since the macro in use contains GUI commands which are not recorded on the LOG file. To remedy this, add /PMACRO to the beginning of the macro. *** WARNING *** CP = 53.508 TIME= 12:05:00 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 69.639 TIME= 12:05:29 Element is too small. Change system of units or element size. *** WARNING *** CP = 74.771 TIME= 12:06:10 Some interpolation points do not lie on the selected elements. The PDEF operation produced no results for these points. *** WARNING *** CP = 75.286 TIME= 12:11:56 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** ERROR *** CP = 116.174 TIME= 12:12:37 Poorly shaped facets in surface mesh. Either: (1) Mesh surfaces with triangular elements & modify mesh control or SmartSize settings to get good triangular mesh, then VMESH again; AND/OR (2) Use alternate mesher by setting "MOPT,VMESH,ALTE". *** WARNING *** CP = 117.796 TIME= 12:15:00 The requested EPLOT command cannot be executed. Either elements do not exist or the selected elements are not supported by PowerGraphics. To correct this situation, try selecting different elements,etc, or turning off PowerGraphics. *** WARNING *** CP = 118.342 TIME= 12:15:38 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** ERROR *** CP = 159.230 TIME= 12:16:19 Poorly shaped facets in surface mesh. Either: (1) Mesh surfaces with triangular elements & modify mesh control or SmartSize settings to get good triangular mesh, then VMESH again; AND/OR (2) Use alternate mesher by setting "MOPT,VMESH,ALTE". *** WARNING *** CP = 159.995 TIME= 12:17:12 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** ERROR *** CP = 1185.155 TIME= 12:34:19 Volume mesh failure - perhaps due to: (1) Poorly shaped triangle facets: Mesh surfaces with triangular elements, modify mesh control to get good triangular mesh, then VMESH again (2) Complex geometry: Subdivide volume and try again. *** WARNING *** CP = 1186.060 TIME= 12:46:39 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 1186.278 TIME= 12:46:39 SMRTSIZE command requires input arguments. *** WARNING *** CP = 1205.451 TIME= 12:46:58 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.529 TIME= 12:46:58 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.545 TIME= 12:46:58 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.591 TIME= 12:46:58 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.623 TIME= 12:46:58 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.669 TIME= 12:46:58 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.685 TIME= 12:46:59 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.732 TIME= 12:46:59 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.747 TIME= 12:46:59 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.779 TIME= 12:46:59 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.810 TIME= 12:46:59 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 1 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 5 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 20 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 21 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 22 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 23 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 24 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 1205.888 TIME= 12:46:59 Area 25 has no nodes associated with it. Constraint(s) not transferred. *** ERROR *** CP = 1205.888 TIME= 12:46:59 There are no nodes defined. *** WARNING *** CP = 1206.605 TIME= 12:47:30 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 1242.907 TIME= 12:48:07 Shape testing revealed that 3 of the 376982 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 1246.682 TIME= 12:48:09 Previous testing revealed that 3 of the 376982 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 1300.596 TIME= 12:50:18 Element is too small. Change system of units or element size. *** WARNING *** CP = 1331.219 TIME= 12:56:30 Some interpolation points do not lie on the selected elements. The PDEF operation produced no results for these points. *** ERROR *** CP = 1332.249 TIME= 13:02:45 Unknown expression in input line. *** ERROR *** CP = 1332.420 TIME= 13:02:49 The above error occurred processing field= =-1000 Line= *SET,vp,(=-1000). *** WARNING *** CP = 1332.810 TIME= 13:03:17 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** ERROR *** CP = 1360.797 TIME= 13:03:45 Volume mesh failure - perhaps due to: (1) Poorly shaped triangle facets: Mesh surfaces with triangular elements, modify mesh control to get good triangular mesh, then VMESH again. (2) Complex geometry: Subdivide volume and try again. *** WARNING *** CP = 1361.686 TIME= 13:04:18 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** ERROR *** CP = 1390.780 TIME= 13:04:48 An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data has been corrupted. ANSYS is unable to recover and will terminate. Previously saved files are unaffected. /COM,ANSYS RELEASE 12.1 UP20091102 13:05:41 09/25/2012 *** WARNING *** CP = 1.357 TIME= 13:05:59 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** ERROR *** CP = 30.576 TIME= 13:06:28 An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data has been corrupted. ANSYS is unable to recover and will terminate. Previously saved files are unaffected. /COM,ANSYS RELEASE 12.1 UP20091102 16:42:11 09/25/2012 *** WARNING *** CP = 1.498 TIME= 16:47:41 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 37.815 TIME= 16:48:17 Shape testing revealed that 9 of the 371788 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 41.559 TIME= 16:48:19 Previous testing revealed that 9 of the 371788 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 119.481 TIME= 16:50:52 Element is too small. Change system of units or element size. *** WARNING *** CP = 256.653 TIME= 16:53:05 The LOG file will not reproduce the ANSYS session since the macro in use contains GUI commands which are not recorded on the LOG file. To remedy this, add /PMACRO to the beginning of the macro. /COM,ANSYS RELEASE 12.1 UP20091102 17:04:40 09/25/2012 *** WARNING *** CP = 1.357 TIME= 17:05:07 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 23.946 TIME= 17:05:29 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 23.977 TIME= 17:05:29 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.009 TIME= 17:05:29 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.009 TIME= 17:05:29 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.040 TIME= 17:05:29 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.071 TIME= 17:05:30 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.087 TIME= 17:05:30 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.102 TIME= 17:05:30 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.118 TIME= 17:05:30 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.133 TIME= 17:05:30 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.165 TIME= 17:05:30 Meshing of volume 5 was aborted by the user. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operations Guide.). *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 1 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 5 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 20 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 21 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 22 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 23 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 24 has no nodes associated with it. Constraint(s) not transferred. *** WARNING *** CP = 24.305 TIME= 17:05:30 Area 25 has no nodes associated with it. Constraint(s) not transferred. *** ERROR *** CP = 24.305 TIME= 17:05:30 There are no nodes defined. *** WARNING *** CP = 24.601 TIME= 17:06:04 Some of the requested volumes to be operated on were also included in the selected set to be subtracted. These volumes have been removed from the volume to be subtracted list. *** WARNING *** CP = 60.731 TIME= 17:06:40 Shape testing revealed that 9 of the 371788 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. *** WARNING *** CP = 64.974 TIME= 17:06:43 Previous testing revealed that 9 of the 371788 selected elements violate shape warning limits. To review warning messages, please see the output or error file, or issue the CHECK command. *** WARNING *** CP = 117.999 TIME= 17:09:05 Element is too small. Change system of units or element size. *** WARNING *** CP = 148.575 TIME= 17:15:25 Some interpolation points do not lie on the selected elements. The PDEF operation produced no results for these points. *** WARNING *** CP = 154.862 TIME= 17:20:37 No data is available for the selected model or data location specifications. *** WARNING *** CP = 154.909 TIME= 17:21:13 No data is available for the selected model or data location specifications.