

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
length: 0xD1, numMsgs= 0x2, primListRevision= 111
allPrimCount: 10, replyLength: 0x6D, replyCount: 0x1
===========================================================
Initialize this mask set (possible only when cfg is set). For initialization
(storage= INIT_MASK, port= 0, 1, or both) the (module) mask field is 
gnored. The non-zero nibbles in mask-type determine which types of
data are treated: command masks, mode bits, and formatter links.
Initialization zeros out the set's command mask(s), sets mode bits
appropriately (see asterisk in list comment), & turns off formatter links.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 0,  id: 0x2007, primRevision: 103, length: 0xC4, replyLength: 0x67
SEND_SLAVE_LIST
slaveNumber= 0, listLength= 0xBC, *slavePrimList= 0xFFFFFFFF, *slaveRepData= 0xFFFFFFFF
inSlaveListHeader.length: 0xBC, numMsgs= 0x8, primListRevision= 111,
replyLength: 0x63, replyCount: 0x6
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 0,  id: 0x1002, primRevision: 107, length: 0x10, replyLength: 0x7
HISTOGRAM_SETUP
*base= 0xFFFFFFFF, nBins= 0x10
padding[]={ 0x2, 0x4 }, dataType[]={ 0x0, 0x0 }
binSize= 32, opt[]={ 0x0, 0x1, 0x0, 0x0 }
validModules[]={ 0x0, 0x0 }
moduleRangeMap[0][]={ 0x0, 0x0 }, moduleRangeMap[1][]={ 0x0, 0x0 }
*xPtr[]={ 0x2080000, 0x2080000 }
inputFile1[]= c:\RodTS\Data\Testing\calibration\qcal_1-15_29bins.bin
inputFile2[]= c:\RodTS\Data\Testing\calibration\qcal_1-15_29bins.bin
default1= 0
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 1,  id: 0xC, primRevision: 101, length: 0x47, replyLength: 0x0
START_TASK
taskType= 0x20, taskRevision= 100, priority= 1, completionFlag= 1,
taskStruct={ 0x100, 0x1, 0x0, 0x0, 0x0, 0x0, 0x0,}
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 2,  id: 0x0, primRevision: 100, length: 0x14, replyLength: 0x14
ECHO
inputDataOption= 0
testPattern= 0x10111213, testDataLength= 0x10
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 3,  id: 0x0, primRevision: 100, length: 0x14, replyLength: 0x14
ECHO
inputDataOption= 0
testPattern= 0x10111213, testDataLength= 0x10
===========================================================
Here the mask set is updated using the module mask field; for this 
mask set the 1st 12 modules are added (links 00-0b & 10-1b,  and the
corresponding command links) . Note that for UPDATE_MASK the
nibbles must be set to the specific pattern desired (off/on, play/skip
etc.)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 4,  id: 0x0, primRevision: 100, length: 0x14, replyLength: 0x14
ECHO
inputDataOption= 0
testPattern= 0x10111213, testDataLength= 0x10
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 5,  id: 0x0, primRevision: 100, length: 0x14, replyLength: 0x14
ECHO
inputDataOption= 0
testPattern= 0x10111213, testDataLength= 0x10
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 6,  id: 0xD, primRevision: 100, length: 0x7, replyLength: 0x0
TASK_OPERATION
taskType= 32, taskOperation= 0, data= 0x0
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 7,  id: 0x9, primRevision: 102, length: 0x8, replyLength: 0x6
SEND_DATA
dataType= 33, auxVal= 0x0, repBufferFlag= 0, timeout= 0x20000
outDataFileName[]= h.bin
===========================================================

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
index: 1,  id: 0x2008, primRevision: 103, length: 0x7, replyLength: 0x0
START_SLAVE_LIST
slaveNumber= 0, pauseMasterList= 1, getSlaveReply= 1
