Pin Freeze File:  version G.26

9572XL44VQ XC9572XL-5-VQ44
acqclk S:PIN43
acqen S:PIN28
decim_ratio<0> S:PIN31
decim_ratio<1> S:PIN34
n1param<0> S:PIN21
n1param<1> S:PIN40
ren1 S:PIN42
reset S:PIN33
trig_mode S:PIN16
trigger S:PIN1
counten S:PIN14
decim_flag S:PIN29
fsmst<0> S:PIN5
fsmst<1> S:PIN7
fsmst<2> S:PIN12
ren2 S:PIN23
rst2 S:PIN39
trigger_en S:PIN32
wen2 S:PIN20


;The remaining section of the .gyd file is for documentation purposes only.
;It shows where your internal equations were placed in the last successful fit.

PARTITION FB1_1 cnt_ovf1 rst2_OBUF EXP6_
PARTITION FB1_5 EXP7_ cnt_val<5> EXP8_ cnt_val<0>
		 EXP9_ cnt_val<4> EXP10_ cnt_val<1>
		 EXP11_ cnt_val<3> cnt_val<2> EXP12_
		 EXP13_ EXP14_
PARTITION FB2_2 decim_flag_OBUF
PARTITION FB2_8 trigger_en_OBUF
PARTITION FB2_17 EXP15_ cnt_ovf2
PARTITION FB3_2 fsmst_0
PARTITION FB3_4 state_FFT3 fsmst_2/fsmst_2_SETF fsmst_2/fsmst_2_RSTF fsmst_1/fsmst_1_SETF
		 fsmst_1 fsmst_1/fsmst_1_RSTF fsmst_0/fsmst_0_SETF fsmst_2
		 Inst_ren_wen/Inst_decim/cnt<2> Inst_ren_wen/Inst_decim/cnt<1> Inst_ren_wen/Inst_decim/cnt<0> counten_OBUF
		 fsmst_0/fsmst_0_RSTF__$INT state_FFT1 state_FFT2
PARTITION FB4_5 wen2_OBUF
PARTITION FB4_12 cnt_val<9> cnt_val<8> ren2_OBUF cnt_val<7>
		 cnt_val<6> cnt_val<11> cnt_val<10>