# chnctrl.lpc 
# The constraints in this file were created simply to be viewed.  
# If you wish to use these constraints, please copy them into your  
# project's constraint file. If you do not have a project constraints  
# file yet, please use the "Project->New Source" menu to create one.


#PACE: Start of Constraints generated by PACE
#PACE: Start of PACE I/O Pin Assignments
NET "acqen"  LOC = "P6"  ;
NET "clk"  LOC = "P22"  ;
NET "dataready"  LOC = "P8"  ;
NET "dflag"  LOC = "P76"  ;
NET "dr<0>"  LOC = "P14"  ;
NET "dr<1>"  LOC = "P13"  ;
NET "full3"  LOC = "P96"  ;
NET "latchtrig"  LOC = "P25"  ;
NET "n1<0>"  LOC = "P16"  ;
NET "n1<1>"  LOC = "P15"  ;
NET "ren1"  LOC = "P41"  ;
NET "ren2"  LOC = "P73"  ;
NET "reset"  LOC = "P99"  ;
NET "rst1"  LOC = "P42"  ;
NET "rst2"  LOC = "P72"  ;
NET "rst3"  LOC = "P67"  ;
NET "rstdataready"  LOC = "P7"  ;
NET "trigger"  LOC = "P23"  ;
NET "trigmode"  LOC = "P12"  ;
NET "wen1"  LOC = "P40"  ;
NET "wen2"  LOC = "P94"  ;
NET "wen3"  LOC = "P95"  ;
#PACE: Start of PACE Area Constraints
#PACE: Start of PACE Prohibit Constraints
#PACE: End of Constraints generated by PACE

#PINLOCK_BEGIN

#Wed Mar 10 13:30:31 2004

NET "acqen"          LOC =  "S:PIN6";
NET "clk"            LOC =  "S:PIN22";
NET "dr<0>"          LOC =  "S:PIN14";
NET "dr<1>"          LOC =  "S:PIN13";
NET "full3"          LOC =  "S:PIN96";
NET "n1<0>"          LOC =  "S:PIN16";
NET "n1<1>"          LOC =  "S:PIN15";
NET "reset"          LOC =  "S:PIN99";
NET "rstdataready"   LOC =  "S:PIN7";
NET "trigger"        LOC =  "S:PIN23";
NET "trigmode"       LOC =  "S:PIN12";
NET "dataready"      LOC =  "S:PIN8";
NET "dflag"          LOC =  "S:PIN76";
NET "latchtrig"      LOC =  "S:PIN25";
NET "ren1"           LOC =  "S:PIN41";
NET "ren2"           LOC =  "S:PIN73";
NET "rst1"           LOC =  "S:PIN42";
NET "rst2"           LOC =  "S:PIN72";
NET "rst3"           LOC =  "S:PIN67";
NET "wen1"           LOC =  "S:PIN40";
NET "wen2"           LOC =  "S:PIN94";
NET "wen3"           LOC =  "S:PIN95";
#PINLOCK_END