Disclaimer: The information on this page has not been checked by an independent person.   Use this information at your own risk.
ROYMECH

Click arrows to page adverts



These Pages include various standards. To confirm the status of any standard, identify the replacement standard if it is obsolete and/or purchase the standard please use.
BSI Shop
It is also possible to become a BSI member and obtain copies of the Standards at much reduced prices.

Home
Screws Index Page...

Notes:
The screw and nut sizes are in accordance with BS 3692:1967 (ISO 272 equivalent).    This standard has now been superseded by BS 3692:2001. (The data has not yet been checked against the latest revision. ). The thread form is in accordance with BS 3643:2007

All dimensions in millimetres

Relevant Standards

BS 3643 Part 1:2007..ISO metric screw threads. Principles and basic data

BS 3643 Part 2:2007..ISO metric screw threads. Specification for selected limits of size

BS 3692:2001..ISO metric precision hexagon bolts, screws and nuts. Specification




Table of Bolt Sizes ...ISO metric precision hexagon bolts , Coarse Thread Series, Bolt tolerance class 6g

Thread Form to BS 3643

Nominal (D) Thread. Bolt dia Bolt Head Bolt Nut
Size Pitch Major(d)
max - min
Minor(d3 )
max - min
Pitch Diameter (d2 )
max - min
Thick (Zb) Acc/Flats (A/F)
max - min
Acc./Corn (A/C)
M3 0,5 2,980 - 2,874 2,439 -2,272 2,655 - 2,580 2,125 5,50 - 5,38 6,40
M4 0,7 3,978 - 3,838 3,220 - 3,002 3,523 - 3,433 2,925 7,00 - 6,85 8,10
M5 0,8 4,976 - 4,826 3,869 - 4,110 4,456 - 4,361 3,650 8,00 - 7,85 9,20
M6 1,0 5,974 - 5,794 4,891 - 4,596 5,324 - 5,212 4,150 10,00 - 9,78 11,50
M8 1,25 7,972 - 7,760 6,272 - 6,619 7,160 - 7,042 5,650 13,00 - 12,73 15,00
M10 1,5 9,968 - 9,732 8,344 - 7,938 8,994 - 8,862 7,180 17,00 - 16,73 19,60
M12 1,75 11,966 - 11,701 10,072 - 9,601 10,829 - 10,679 8,180 19,00 - 18,67 22,10
M16 2,0 15,962 - 15,682 13,797 - 13,271 14,663 - 14,503 10,180 24,00 - 23,67 27,70
M20 2,5 19,958 - 19,623 17,252 - 16,624 18,334 - 18,164 13,215 30,00 - 29,67 34,60
M24 3,0 23,952 - 23,577 20,701 - 19,955 22,003 - 21,803 15,215 36,00 - 35,58 41,60
M30 3,50 29,947 - 29,522 26,158 - 25,306 27,674 - 27,462 19,260 46,00 - 45,38 53,1
M36 4,00 35,940 - 35,465 31,610 - 30,654 33,342 - 33,118 23,260 55,00 - 54,26 63,5




Nuts Sizes, Coarse Thread Series

Nut tolerance class 6H are dimensioned in BS3692

Thread form to BS 3643


Nominal Thread. Nut Diameter Nut
Size Pitch Major (D) Minor (D1 )
Max - min
Thick (Zn)
M3 0,5 3,000 2,599 - 2,459 2,40
M4 0,7 4,000 3,422 - 3,242 3,20
M5 0,8 5,000 4,334 - 4,134 4,00
M6 1,0 6,000 5,153 - 4,917 5,00
M8 1,25 8,000 6,912 - 6,647 6,50
M10 1,5 10,000 8,676 - 8,376 8,00
M12 1,75 12,000 10,441 - 10,106 10,00
M16 2,0 16,000 14,210 - 13,835 13,00
M20 2,5 20,000 17,744 - 17,294 16,00
M24 3,0 24,000 21,252 - 20,752 19,00
M30 3,5 30,000 26,771 - 26,211 24,00
M36 4,0 36,00 32,270 - 31,670 29,00





Bolt Sizes ...ISO metric precision hexagon bolts , Fine thread series

Bolt tolerance class 6g are dimensioned in BS3692:1967


Nominal Thread. Bolt dia (d) Bolt Head Bolt Nut
Size Pitch Major
max - min
Minor
max - min
Pitch Diameter
max - min
Thick (Zb) Acc/Flats
max - min (A/F)
Acc./Corn (A/C)
M6 0,75 5,978 - 5,838 5,166 - 4,929 5,491 - 5,391 4,150 10,00 - 9,78 11,50
M8 1,00 7,974 - 7,794 6,891 - 6,596 7,324 - 7,212 5,650 13,00 - 12,73 15,00
M10 1,25 9,972 - 9,760 8,619 - 8,272 9,160 - 9,042 7,180 17,00 - 16,73 19,60
M12 1,25 11,972 - 11,760 10,619 - 10,258 11,160 - 11,028 8,180 19,00 - 18,67 22,10
M16 1,50 15,968 - 15,732 14,344 - 13,930 14,994 - 14,854 10,180 24,00 - 23,67 27,70
M20 1,5 19,968 - 19,732 18,344 - 17,930 18,994 - 18,854 13,215 30,00 - 29,67 34,60
M24 2,0 23,962 - 23,682 21,797 - 21,261 22,663 - 22,493 15,215 36,00 - 35,58 41,60
M30 2,0 29,962 - 29,682 27,797 - 27,261 28,663 - 28,493 19,260 46,00 - 45,38 53,1
M36 3,00 35,952 - 35,577 32,704 - 31,955 34,003 - 33,803 23,260 55,00 - 54,26 63,5





Nuts Sizes - Fine Thread Series..

Nut tolerance class 6H are dimensioned in BS3692:1967

Nominal Thread. Nut Diameter Nut
Size Pitch Major Minor
Max - min
Thick (Zn)
M6 0,75 6,000 5,378 - 5,188 5,00
M8 1,00 8,000 7,153 - 6,917 6,50
M10 1,25 10,000 8,912 - 8,647 8,00
M12 1,25 12,000 10,912 - 10,647 10,00
M16 1,50 16,000 14,676 - 14,376 13,00
M20 1,50 20,000 18,676 - 18,376 16,00
M24 2,0 24,000 22,210 - 21,835 19,00
M30 2,0 30,000 28,210 - 27,835 24,00
M36 3,0 36,00 33,252 - 32,752 29,00





Washers.. Plain Washers , bright metric series

Bright Washers are dimensioned in BS4320: 1968

Nominal Washer Diameter Washer Thickness
Size Internal
max - min
External
max - min
Thick
max - min
Thin
M3 3,4 - 3,2 7,0 - 6,7 0,6 - 0,4 -
M4 4,5 - 4,3 9,0 - 8,7 0,9 - 0,7 -
M5 5,5 - 5,3 10,0 - 9,7 1,1 - 0,9 -
M6 6,7 - 6,4 12,5 - 12,1 1,8 - 1,4 0,9 - 0,7
M8 8,7 - 8,4 17,0 - 16,6 1,8 - 1,4 1,1 - 0,9
M10 10,9 - 10,5 21,0 - 20,5 2,2 - 1,8 1,45 - 1,05
M12 13,4 - 13,0 24,0 - 23,5 2,7 - 2,3 1,8 - 1,4
M16 17,4 - 17,00 30,0 - 29,5 3,3 - 2,7 2,2 - 1,8
M20 21,5 - 21,0 37,0 - 36,2 3,3 - 2,7 2,2 - 1,8
M24 25,5 - 25,0 44,0 - 43,2 4,3 - 3,7 2,7 - 2,3
M30 31,6 - 31,0 56,0 - 55,0 4,3 - 3,7 2,7 - 2,3
M36 37,6 - 37,0 66,0 - 65,0 5,6 - 4,4 3,3 - 2,7





Washers.. Plain Washers , Black metric series

Black Washers are dimensioned in BS4320: 1968

Nominal Washer Diameter Washer Thickness
Size Internal
max - min
External
max - min
Thickness
max - min
M5 5,8 - 5,5 10,0 - 9,2 1,2 - 0,8
M6 7,0 - 6,6 12,5 - 11,7 1,9 - 1,3
M8 9,4 - 9,0 17,0 - 16,2 1,9 - 1,3
M10 11,5 - 11,0 21,0 - 20,2 2,3 - 1,7
M12 14,5 - 14,0 24,0 - 23,2 2,8 - 2,2
M16 18,5 - 18,00 30,0 - 29,2 3,6 - 2,4
M20 22,6 - 22,0 37,0 - 35,8 3,6 - 2,4
M24 26,6 - 26,0 44,0 - 42,8 4,6 - 3,4
M30 33,8 - 33,0 56,0 - 54,5 4,6 - 3,4
M36 39,8 - 39,0 66,0 - 64,5 6,0 - 4,0
M42 45,8 - 45,0 78,0 - 76,5 8,2 - 5,8
M48 53,0 - 52,0 92,0 -90,0 9,2 - 6,8

For DIN125 Plain Washers (Overall dimensions) Din 125 Washer



Useful Links
  1. Co_Design..Dimensions of Metric fastener threads etc
  2. Metric Thread Sizes..Metric THREAD sizes from Tribology - abc
  3. Metric Thread Sizes..Metric THREAD sizes from Newmantools - abc
  4. Metric Thread Tolerances..Metric Thread tolerances from Fullermetric
  5. Metrication.com..Information on metric threads and other metric subjects
  6. Maryland Metrics..Comprehensive information on metric screws threads.

This Page is being developed

Home
Screws Index Page...

Please Send Comments to Roy Beardmore

Last Updated 18/06/2008